Sloping wet areas toward the drain
We slope shower floors and other wet-area surfaces toward the drain. For shower floors, the specified slope is 1/4 to 1/2 inch per foot. That range applies to the shower floor—not automatically to every bathroom surface that gets splashed.
Applying and checking the waterproof membrane
We apply liquid or fabric-reinforced waterproofing using the manufacturer's specified number of coats and thickness. We check wet-film thickness with a gauge during application. The coat count and thickness requirements both guide the work; applying the required number of coats does not replace checking their thickness.
Shower waterproofing cost
Shower waterproofing costs $450–$750 per shower. This is the price range for shower waterproofing, not a total bathroom floor tiling price.
A Look at the Work
A visual look at what the service involves.
How It Works
-
Reach Out
A two-minute call is enough to tell us what we're working with and what to check first.
-
We Take a Look
A tech inspects the problem in person — no guessing from photos, no drive-by quotes.
-
Written Estimate
We put the fix, the timeline, and the number on paper — take your time with it.
-
The Fix, Done Right
Our crew does the work, checks it, and leaves the site clean. You see everything we did.
Some of what that looks like in the field:
- Remove thinset from grout joints before grouting, pack joints with grout, and keep shower inside corners clear for flexible sealant.
- Install movement joints in wet-area tile work in accordance with the applicable TCNA method.
Typical Cape Girardeau Pricing
These are planning ranges. Nothing is final until it is in writing.
$3–$15
$2–$7
Straight Answers to Common Questions
How much does it cost to lay 1000 sq ft tile?
Labor for 1000 square feet typically ranges from $3,000 to $15,000. Additional charges for demolition, subfloor repair, or moisture mitigation can increase the total. Larger areas sometimes receive volume discounts from installers.
How much would it cost to tile a 10x10 bathroom?
A 100-square-foot bathroom floor usually costs $300–$1,500 in labor. Shower walls or floors add $450–$750 for waterproofing plus $1,800–$5,000 for full shower tile installation. Exact price depends on tile choice and prep work required.
What should you put down before tiling a floor?
Install a suitable backerboard or membrane over a clean, level subfloor. Repair any damaged areas first, then apply a waterproofing layer in wet zones. Use a level to confirm flatness before proceeding with thinset and tile.
You Might Also Need
Serving Cape Girardeau and Nearby
Crews serve Cape Girardeau, MO. Call (573) 381-9112 to confirm coverage for your address.
How We Do Business
- Free EstimatesThe visit and the written scope cost you nothing.
- We show up when we sayIf the plan changes, you hear it from us first.
- Local crew, local jobsClose enough to come back if anything needs a second look.